Certificate of Compliance - Remodels
Please see the following guidelines regarding how to receive a Certificate of Compliance when remodeling a property with remodeling costs valued at $75,000 or more, or when adding a bathroom. If you believe your property already has a Certificate of Compliance on file, please contact Ross Valley Sanitary District (RVSD) at 415-259-2949 or email us.
Obtain a Certificate of Compliance prior to the final inspection of any remodel project by fixing the Private Sewer Lateral, if necessary, and then having an RVSD Inspector witness the pressure test (using air or water). The Certificate of Compliance must be submitted to the agency issuing your building permit prior to final sign-off. Keep in mind that private sewer lateral work can be done before, during, or after the building/remodeling work at your discretion.
Step 1. Determine if the Existing Private Sewer Lateral is Eligible for Exemption
If the Private Sewer Lateral was constructed or fully replaced and passed final inspection by a District Inspector within the last 20 years, the Private Sewer Lateral will be exempt from the pressure test. To determine if your lateral is exempt, call RVSD at 415-259-2949 or email us for more information. Be sure to include your name, contact information, full address of the property in question, parcel number (if available), and any information you may have that would lead you to believe the property may be exempt. All of this information will help us when reviewing the District's records. If the District is unable to provide an immediate answer, one will be provided within 2 business days.
Step 2. Determine if the Existing Private Sewer Lateral is in Compliance
Determine if the existing Private Sewer Lateral meets the requirements of the Ordinance (PDF) and hire a plumbing contractor to check for leaks and other defects. Your contractor will advise you if work is needed for your Private Sewer Lateral to pass the pressure test. If no work is required, proceed to Step 5 below.
During the installation of new gas lines by Pacific Gas and Electric Company (PG&E), some private sewer laterals may have been pierced or completely bored through - known as a cross bore. Underground Service Alert (USA) does not typically mark private sewer laterals when out marking utilities. As a result, cross bores may go undetected, and if pipe has been damaged, create a potentially hazardous situation. For gas line cross bore information, visit PG&E's website. A review of a closed-circuit television (CCTV) inspection should also include looking for evidence of cross bore. If you suspect a gas line cross bore, call PG&E at 800-743-5000. If you suspect a gas leak, warn inhabitants, evacuate the area and call 911 and PG&E at 800-743-5000.
Step 3. Obtain Required Permits
The District requires permits to be pulled for any Private Sewer Lateral work. Permits should be obtained prior to beginning any work. Additionally, other agencies may require permits for the work being performed. Please contact your local building department to determine if they require permits for any portion of the work related to the Private Sewer Lateral.
Step 4. Repair or Replace the Private Sewer Lateral
Your contractor will repair or replace the Private Sewer Lateral in accordance with District standards and permitting requirements and other local agency requirements. If full replacement is needed, you may qualify for financial assistance through RVSD's Lateral Replacement Program.
Step 5. Schedule a Private Sewer Lateral Pressure Test
Your contractor should contact RVSD at 415-259-2949 to schedule an appointment for a District Inspector to conduct a Private Sewer Lateral pressure check or final inspection, if related to a repair or replacement permit. The Inspector will witness the pressure test that will be performed by the contractor and pay the required inspection fee. It is likely that your contractor will make the arrangements in scheduling with the District. This will be included as part of the final inspection if this is being done as part of a repair or replacement permit.
Your contractor will set up and administer the pressure test per the provided guidelines. RVSD will witness the test to confirm that your Private Sewer Lateral is without defect and has proper connections.
Step 6. Pass the Pressure Test & Receive Your Certificate of Compliance
Once the District Inspector verifies that the Private Sewer Lateral has passed the pressure test, the Certificate of Compliance will be sent to the address listed on the permit or inspection paperwork.
Step 7. Complete the Sale
If you are selling a property, provide a copy of the Certificate of Compliance to the buyer before the title transfer. If you are buying a property, retain a copy of the Certificate of Compliance for your records. Process is now complete!